软管泵,拦水带成型机研发生产销售

众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。

It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.

 

单管软管泵应用范围：
石油工业中的钻井泥浆、原油输送及汽油、煤油等有机溶剂和燃料油的输送；水处理的淤泥浆，石灰浆输送；采矿、冶金行业，如金矿开采中的填充物料，黄金冶炼中矿浆输送；医药行业中药品料液的输送；食品行业中的油类物料及饮料输送；造纸行业的纸浆，硫磺浆输送；建筑行业的水泥砂浆输送；陶瓷行业的陶瓷釉浆输送；核废料、电解废渣、金属渣液、油漆、涂料等等液体物料的输送。

Application range of single tube hose pump:
Drilling mud, crude oil transportation and transportation of organic solvents and fuel oils such as gasoline and kerosene in the petroleum industry; transportation of sludge and lime slurry for water treatment; mining and metallurgical industries, such as filling materials in gold mining, and pulp in gold smelting Transportation; transportation of pharmaceutical materials and liquids in the pharmaceutical industry; transportation of oil materials and beverages in the food industry; transportation of pulp and sulfur pulp in the paper industry; transportation of cement mortar in the construction industry; transportation of ceramic glaze in the ceramic industry; nuclear waste and electrolysis Transportation of liquid materials such as waste slag, metal slag liquid, paint, coating and so on.

 

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.